Hi, I have heard issue on Dievas watch with Radiomir case wire lugs that keeps loosing and ends up missing piece of the wire lug that can be frustrating.

I'd like to share what I did to mine to remedy the problem.

First is the safety joiner between the two wire lugs (similar as in Panerai style), instead metal pipe joiner, I use common PC cable sleeve.
Second is the prevention on the screw that easily loosen up.

1. Find a piece of PC cable and remove the copper



2, I force bigger hole to fig the wire lug, I use the common watch screw driver. Do at each side from its ends as it will be easier and can use lighter to heat up to make it even easier to enlarge the hole. Enlarging hole is done as it will be force grip the wire lugs.



3. Alignment of both wire lugs when inserted into the strap at each end can be tricky.






4. I use plumbing tape on the screw as to prevent the screw loosen up.




5. Plug the lugs in and screw them down... Walsh... Problem solved.



6. Wrist shots



Dievas with black seal strap.


Other PAMs